Product Center
HR400-N Two-stage piston pusher centrifuge
Piston push centrifuge
- Product Description
-
- Commodity name: HR400-N Two-stage piston pusher centrifuge
- Commodity ID: HR400-N-1
HR400-NB two-stage piston push centrifuge is mainly composed of hydraulic device (oil supply station), push mechanism (compound cylinder), oil cooler, base (oil tank), bearing room assembly, casing, inner and outer drums, screen, collection trough, door cover, feed pipe, washing pipe, main and auxiliary motors, electrical control cabinet, etc.
■ Brief description of centrifuge structure
The two-stage piston push centrifuge is mainly composed of hydraulic device (oil supply station), push mechanism (composite oil cylinder), oil cooler, machine base (oil tank), bearing chamber combination, machine casing, inner and outer drums, screen, collection tank, door cover, feed pipe, washing pipe, main and auxiliary motors, electrical control cabinet, etc.
• Hydraulic device: The hydraulic device consists of pump base, oil pump, overflow valve, overflow valve seat, oil pump motor, pressure hose, pressure gauge, thermometer, etc.
• Push mechanism: The push mechanism consists of pressure oil cylinder combination, piston combination, slide valve, guide valve, pulley, etc. Under the action of pressure oil, the piston is pushed to reciprocate, driving the inner drum to reciprocate at the same time, thereby realizing the reciprocating push function.
• Oil cooler: The oil cooler has two forms: the curved pipe type is located in the machine base oil tank, or the centralized cooling is located above the machine base, to ensure that the temperature of the pressure oil is within a certain range.
• Base assembly (oil tank): The base is used to support the rotating body, the pusher mechanism, the hydraulic device and the transmission system. Its bottom also serves as an oil storage tank. It is equipped with an oil filling hole, an oil inlet pipe, an oil drain hole and an oil mark.
• Bearing chamber assembly: The bearing chamber assembly consists of a bearing seat, a main shaft, a push rod, a sliding bearing and a roller bearing. The main shaft rotates in two heavy-duty bearings, and the push rod reciprocates in the two sliding bearings in the main shaft. The lubrication of all bearings is completed by the pressure oil provided by the hydraulic system.
• Casing assembly: The casing is a stainless steel weldment, with slag discharge holes and liquid discharge holes on the casing, and a flushing pipe is provided. The drum rotates in the casing to ensure safe operation.
• Inner and outer drums: There are filter holes for liquid flow on the walls of the inner and outer drums. The outer drum is connected to the main shaft (hollow shaft) and rotates with the main shaft. The outer drum is connected to the pusher plate in the inner drum through a support rod, so that the pusher plate and the outer drum rotate synchronously. The inner drum is connected to the push rod and linked to the outer drum. While rotating synchronously with the outer drum, it also reciprocates with the push rod. Screen: The screen is a plate screen composed of a screen with narrow slots.
• Aggregate trough: The aggregate trough is located at the front end of the outer drum of the centrifuge and is fixed on the casing. The outlet of the aggregate trough is connected to the slag discharge hole on the casing. The filter residue pushed out of the outer drum enters the aggregate trough. The filter residue is discharged from the aggregate trough in the tangential direction by the scraper, and then discharged from the centrifuge through the slag discharge port of the casing.
• Door cover: The front end of the outer shell is equipped with a door cover, and the door cover is equipped with a feed pipe and a washing pipe.
• Feed pipe: The material enters the centrifuge through the feed pipe, and the material is evenly distributed on the inner drum screen through the distribution plate.
• Washing pipe: The washing pipe is installed on the door cover, one end of which extends into the drum, and the washing liquid enters the drum through the washing pipe to wash the material.
• Main motor: The main motor drives the rotating body to rotate through a V-belt. The main motor is installed on the machine base adjustment plate. The belt tightness is adjusted by the bolts of the drag plate.
• Electrical control cabinet: The electrical control cabinet is a matching special electrical equipment. The main motor and the oil pump motor are both controlled by direct starting. At the same time, it is equipped with power monitoring, starting current and operating current display, as well as overload, short circuit and other protection devices.

Structural diagram of two-stage piston pusher centrifuge (HR300-N / HR400-N / HR500-N)

Structural diagram of two-stage piston pusher centrifuge (HR630-N / HR800-N / HR1000-N)
■ Main performance characteristics of centrifuge
•This type of centrifuge has advanced technical performance, reliability, safety and high efficiency. The centrifuge can operate safely and reliably in the acid and alkaline suspension separation environment, with low failure rate, convenient maintenance, low operating cost and long service life.
•This type of centrifuge has high speed, high separation factor, high output, low energy consumption and good separation effect. The moisture content of the separated filter cake can reach 2-5% (sodium chloride). This type of centrifuge has low vibration, low noise and strong load-bearing capacity. Its bearings are all FAG bearings with high precision and strong load-bearing capacity.
•The entire operation process of this type of centrifuge is carried out in a closed state and does not pollute the environment.
•The number of pushes of this type of centrifuge can be adjusted steplessly within the range of 30-70 times/min, and the adjustment is simple and easy to learn. The most appropriate number of pushes can be selected according to the working conditions and separation requirements.
•This type of centrifuge is equipped with a washing pipe, which can continuously spray water to wash the filter cake layer during the continuous separation process to degrade residual acid and other impurities to obtain the most ideal separation effect.
•The main components of this type of centrifuge (inner and outer drums and main shafts, push rods, cylinders, pistons, bearing chambers, etc.) are precisely processed to strictly ensure dimensional accuracy and shape and position accuracy. The inner and outer drums and pusher trays are precisely balanced to ensure the operating accuracy of the centrifuge and the stability of the centrifuge under high-speed operation.
•The key parts of this type of centrifuge are corrosion-resistant and durable. The service life of the screen is generally more than one year, and the service life of the inner and outer drums, casings, and door covers is more than 8 years.
•The main bearings of this type of centrifuge are lubricated with hydraulic working pressure oil immersion, which is reliable.

Two-stage piston push centrifuge structure anatomy

3D image of the rotor of a two-stage piston pusher centrifuge
■ Centrifuge Overview and Application
The double-stage piston pusher centrifuge is a continuously operated filter centrifuge. It can automatically complete all operating procedures at full speed, such as feeding, washing, separation and unloading.
The double-stage piston pusher centrifuge is suitable for separating suspensions of medium and coarse crystalline materials, that is, suitable for separating suspensions with a solid content of 35-90%, an average solid particle size of ≥0.08mm, and a temperature not exceeding 80°C, and requires a stable feed concentration and uniform feed. It is especially suitable for separating materials that need to be washed in the machine. This machine has the advantages of automatic continuous operation, continuous slag discharge, high production capacity, low moisture content of filter cakes, low power consumption, less crystal breakage, compact structure, good corrosion resistance, stable operation, and low vibration.
■ Working principle of centrifuge
After the inner and outer drums rotate at full speed, the suspension to be separated is continuously introduced into the circular distribution disk installed on the outer drum through the feed pipe. Under the action of centrifugal force, the suspension is evenly thrown onto the screen installed on the inner drum along the circumference. Most of the liquid phase is thrown out of the drum through the gaps of the screen and the holes in the wall of the inner drum, while the solid particles are retained on the screen to form a filter residue layer. When the inner drum returns, the filter residue layer of the inner drum is pushed forward axially for a distance through the pusher plate. When the inner drum advances, the vacated mesh surface forms a new filter residue layer. At the same time, the outer end surface of the inner drum pushes the filter residue layer of the outer drum forward axially for a distance. With the reciprocating motion of the inner drum, the filter residue layers of the inner and outer drums are pushed forward in turn and further dehydrated. Finally, the filter residue is continuously pushed out of the outer drum and enters the aggregate tank. The filter residue is discharged from the centrifuge from the tangential direction through the housing discharge port by the scraper installed on the outer drum. If the filter residue needs to be washed in the centrifuge, the washing liquid is continuously sprayed on the filter residue layer through the washing pipe or other flushing equipment for washing. The separated mother liquor and the washing liquid are collected in the casing and discharged from the drain port. If necessary, the mother liquor and the washing liquid can be discharged separately.

Structural principle diagram of double-stage piston push centrifuge
■ Centrifuge application conditions and adaptability adjustment
•Basic application conditions of double-stage piston push centrifuge:
▲The separated material is a solid-liquid mixture such as suspension, not a turbid liquid;
▲Suspension concentration ≥35%
▲Average particle size of solid phase ≥0.08mm;
▲Operating temperature of separation process ≤80℃
▲Appropriate viscosity;
▲Separation purpose: solid-liquid separation, to obtain the lowest possible solid phase water content and liquid phase solid content.
•Different separation materials have different separation characteristics. Even for the same separation material, different process methods and operating conditions have different separation characteristics. The separation characteristics of the separation material will directly affect the separation effect and processing capacity of the centrifuge. The separation characteristics of the separation material can be adjusted in the following ways:
▲Adjust the concentration of the suspension through pre-enrichment measures;
▲Adjust the previous process to increase the particle size of the solid phase;
▲Adjust the operating temperature to improve the viscosity of the suspension.
• For some difficult-to-separate materials, in addition to taking corresponding adjustment measures for the separated materials themselves, the centrifuge can also be adjusted and improved accordingly;
▲Adjust the drum speed
▲Adjust the number of pushes
▲Adjust the screen gap and opening rate
• For the adjustment of the centrifuge technical parameters, except for the number of pushes, which can be adjusted at the separation site, the rest must be determined before the centrifuge product is manufactured. In addition, for the different corrosiveness of the separated materials, materials with different corrosion resistance must be matched. Therefore, when customers inquire, please inform the characteristic parameters, working conditions and separation requirements of the separated materials in detail.
■ Centrifuge quality assurance
Product quality assurance: Product design and manufacturing inspection is carried out in accordance with technical standards such as JB/T447 "Piston Push Centrifuge" and quality management system standards such as GB/T19001 idt ISO9001 to ensure that product quality and performance meet design drawings, technical standards and user requirements.
■ Typical Separated Materials for Piston Discharge Centrifuges
Chloroacetic acid Acetic acid Animal bones Dehydration of coarse-grained coal slurry and suspension concentrates Dicalcium phosphate dihydrate Ammonium chloride Fructose Sodium sulfate Lysine Dispersed rubber Sodium phosphate Copper sulfate Lysine Dispersed rubber Sodium phosphate Polyacrylate Potassium sulfate Glauber's salt Potassium fluophosphate fertilizer Pentaerythritol salt Ammonium carbonate Urea Potassium fluophosphate fertilizer Raw phosphate Potassium chloride Glutamic acid Potassium fluophosphate fertilizer Dehydration after filtering residue Carnallite Glutamic acid Glutamic acid Chlorate The various separated materials listed in the table are only some of the uses of this type of centrifuge. With the continuous development of various industries in the national economy, its application breadth and depth will continue to expand, and various new uses will continue to increase. For specific separated materials, appropriate centrifuge types, specifications, and technical parameters must be selected through experiments or analogy analysis.
■ Main Technical Parameters and Materials of Centrifuge (Table 1)
Parameter Name/Model HR300-N HR400-N HR500-N Drum diameter (mm) Inner 240, Outer 300 Inner 337, Outer 400 Inner 438, Outer 500 Filter zone length (mm) Inner 150, Outer 150 Inner 155, Outer 145 Inner 180, Outer 180 Drum rotation speed (r/min) 1600-2000 1500-2000 1200-1900 Depends on the properties of the material being separated Depends on the properties of the material being separated 430-672 503-896 402-1010 Discharge stroke (mm) 40 40 50 Discharge frequency (times/min) 50 30-80 30-70 Hydraulic working pressure (MPa) 2-3 2-3 2-3 Feed concentration (% by volume) ≥35 ≥35 ≥35 Average particle size of solid phase (mm) ≥0.08 ≥0.08 ≥0.08 Production capacity (dry material) (t/h) 0.3-0.8 (Sodium Chloride) 1-2 (Sodium Chloride) 3-8 (Sodium Chloride) (Varies with the separated material and process conditions) Filter cake moisture content (%) 2-5 (Sodium Chloride) 2-5 (Sodium Chloride) 2-5 (Sodium Chloride) (Varies with the separated material and process conditions) Feed pressure (MPa) 0.15-0.2 0.15-0.2 0.15-0.2 Operating temperature (°C) ≤80°C ≤80°C ≤80°C Main motor power (kW) 7.5 11 37-45
Depends on material propertiesOil pump motor power (kW) 4 5.5 18.5-22
Depends on material propertiesCentrifuge weight (kg) 1500 2480 3500 Dimensions (mm)
(Length × Width × Height)1900×1040×940 2460×1286×1030 3365×1330×1628 Material The inner and outer drums, discharge plate, feed plate, front seal, casing, door cover assembly, screen, and gas-liquid separator, etc., which are in contact with the material, can be made of 304, 316L stainless steel, or 2205, 2507 duplex stainless steel, or TA2 titanium; Main shaft: 45# steel; Push rod: 40Cr; Base: Q235-A. ■ Main technical parameters and material of the centrifuge (Table 2)
Parameter Name/Model HR630-N HR800-N HR1000-N Drum diameter (mm) Inner 560, Outer 630 Inner 720, Outer 800 Inner 920, Outer 1000 Filter zone length (mm) Inner 240, Outer 240 Inner 720, Outer 800 Inner 180, Outer 180 Drum rotation speed (r/min) 1000-1800 800-1600 650-1250 Depends on the properties of the material being separated Depends on the properties of the material being separated 350-1142 286-1145 236-875 Discharge stroke (mm) 40 40 50 Discharge frequency (times/min) 30-80 30-80 20-70 Hydraulic working pressure (MPa) 3-8 3-8 3-8 Feed concentration (% by volume) ≥35 ≥35 ≥35 Average particle size of solid phase (mm) ≥0.08 ≥0.08 ≥0.08 Production capacity (dry material) (t/h) 5-12 (Sodium Chloride) 12-25 (Sodium Chloride) 18-35 (Sodium Chloride) (Varies with the separated material and process conditions) Filter cake moisture content (%) 2-5 (Sodium Chloride) 3-5 (Sodium Chloride) 3-5 (Sodium Chloride) (Varies with the separated material and process conditions) Feed pressure (MPa) 0.15-0.2 0.15-0.2 0.15-0.2 Operating temperature (°C) ≤80°C ≤80°C ≤80°C Main motor power (kW) 37-55
Depends on material properties55-75
Depends on material properties75-90
Depends on material propertiesOil pump motor power (kW) 22-30
Depends on material properties22-37
Depends on material properties37-45
Depends on material propertiesCentrifuge weight (kg) 4100 6500 12000 Dimensions (mm)
(Length × Width × Height)3190×1460×1280 3990×2000×1530 4200×1900×1900 Material The inner and outer drums, discharge plate, feed plate, front seal, casing, door cover assembly, screen, and gas-liquid separator, etc., which are in contact with the material, can be made of 304, 316L stainless steel, or 2205, 2507 duplex stainless steel, or TA2 titanium; Main shaft: 45# steel; Push rod: 40Cr; Base: Q235-A.
Previous Page
Product Message
Contact our team promptly; we are happy to help.
*Note: Please be sure to fill in the information accurately and keep the communication open. We will contact you as soon as possible.