Product Center
HS1000-N Three-stage piston push centrifuge
Piston push centrifuge
- Product Description
-
- Commodity name: HS1000-N Three-stage piston push centrifuge
- Commodity ID: HS1000-N
The three-stage piston push centrifuge is mainly composed of hydraulic device (oil supply station), push mechanism (compound oil cylinder), oil cooler, base (oil tank), bearing room combination, casing, first/second/third stage drum, screen, collection trough, door cover, feed pipe, washing pipe, main and auxiliary motors, electrical control cabinet, etc.
♦ Brief description of centrifuge structure
The three-stage piston push centrifuge is mainly composed of hydraulic device (oil supply station), push mechanism (compound oil cylinder), oil cooler, base (oil tank), bearing room combination, casing, first/second/third stage drum, screen, collection trough, door cover, feed pipe, washing pipe, main and auxiliary motors, electrical control cabinet, etc.
Three-stage piston pusher centrifuge structure diagram (HS580-N)• Hydraulic device: The hydraulic device consists of a pump base, an oil pump, a relief valve, a relief valve seat, an oil pump motor, a pressure hose, a pressure gauge, a thermometer, etc.
• Discharge mechanism: The discharge mechanism consists of a pressure oil cylinder assembly, a piston assembly, a slide valve, a guide valve, a pulley, etc. Under the action of pressure oil, the piston reciprocates, driving the secondary drum and the discharge plate to reciprocate together, thus achieving the reciprocating discharge function.
• Oil cooler: The oil cooler has two forms: a bent-tube type located in the oil tank of the base, or a centralized cooling type located above the base, ensuring that the pressure oil temperature remains within a certain range.
• Base assembly (oil tank): The base is used to support the rotating body, the discharge mechanism, the hydraulic device, and the transmission system. Its bottom also serves as an oil tank. It is equipped with an oil injection hole, an oil inlet pipe, an oil drain hole, and an oil level gauge.
• Bearing chamber assembly: The bearing chamber assembly consists of a bearing seat, a main shaft, a push rod, a sliding bearing, and a roller bearing. The main shaft rotates in two heavy-duty bearings, and the push rod reciprocates in two sliding bearings in the main shaft. All bearings are lubricated by pressure oil provided by the hydraulic system.
• Casing assembly: The casing is a stainless steel weldment. The casing has slag discharge holes and liquid discharge holes, and is equipped with a washing pipe. The primary, secondary, and tertiary drums rotate inside the casing to ensure safe operation.
• Primary, secondary, and tertiary drums: The walls of the primary, secondary, and tertiary drums are all provided with liquid flow filter holes. The tertiary drum is connected to the main shaft (hollow shaft), and the primary drum is connected to the tertiary drum via a support rod and bolts. The tertiary drum and the primary drum rotate together with the main shaft. The secondary drum is connected to the push rod, and the discharge plate is connected to the secondary drum via a support rod and bolts. The secondary drum and the discharge plate rotate with the push rod, synchronously rotating with the primary and tertiary drums, while also reciprocating with the push rod.
• Screen: The screen is a plate-type screen, composed of slotted screen plates.
• Collecting trough: The collecting trough is located at the front end of the tertiary drum of the centrifuge and is fixed to the casing. The outlet of the collecting trough communicates with the slag discharge hole on the casing. The filter residue discharged from the tertiary drum enters the collecting trough. The filter residue is discharged from the collecting trough in a tangential direction by a scraper, and then discharged from the casing slag discharge port outside the centrifuge.
• Door cover: A door cover is installed at the front end of the casing, and the door cover is equipped with an inlet pipe and a washing pipe.
• Inlet pipe: The material enters the centrifuge through the inlet pipe, and the material is evenly distributed on the screen of the primary drum through the material distribution plate.
• Washing pipe: The washing pipe is installed on the door cover, one end extends into the drum, and the washing liquid enters the drum to wash the material through the washing pipe.
• Main motor: The main motor drives the rotating body to rotate through a V-belt. The main motor is installed on the base adjustment plate, and the tightness of the belt is adjusted by the bolts of the traction plate.
• Electrical control cabinet: The electrical control cabinet is a matching special electrical equipment. The main motor and the oil pump motor both adopt direct voltage reduction start control. At the same time, it is equipped with power monitoring, start-up current and operating current display, and overload and short-circuit protection devices.
Structural diagram of three-stage piston pusher centrifuge (HS650-N / HS800-N / HS1000-N)♦ Main performance characteristics of the centrifuge
• This type of centrifuge has advanced, reliable, safe, and efficient technical performance. The centrifuge can operate safely and reliably in acidic and alkaline suspension separation environments, with a low failure rate, easy maintenance, low operating costs, and a long service life.
• This type of centrifuge has high speed, high separation factor, high output, and low energy consumption. Compared with the two-stage piston discharge centrifuge, the number of drum stages is increased by one, the length of the filtration area is increased, and the filter cake dehydration process adds a loosening step, resulting in better filter cake dehydration and lower moisture content of the separated filter cake.
• This type of centrifuge has low vibration, low noise, and strong load-bearing capacity. The bearings of this type of centrifuge are all FAG bearings, with high precision and strong load-bearing capacity.
• The entire operation process of this type of centrifuge is carried out in a closed state, without environmental pollution.
• The discharge frequency of this type of centrifuge can be steplessly adjusted within the range of 30-80 times/min, and the adjustment is simple and easy, and the most suitable discharge frequency can be selected according to the operating conditions and separation requirements.
• This type of centrifuge is equipped with a washing pipe, which can continuously spray water to wash the filter cake layer during continuous separation, degrading residual acid and other impurities to obtain the most ideal separation effect.
• The main components (primary, secondary, and tertiary drums, main shaft, push rod, oil cylinder, piston, bearing chamber, etc.) of this type of centrifuge are precisely processed to strictly ensure dimensional accuracy and shape and position accuracy. The primary, secondary, and tertiary drums and the discharge plate are precisely dynamically balanced to ensure the running accuracy of the centrifuge and the stability of the centrifuge at high speed.
• Key parts of this type of centrifuge are corrosion-resistant and durable. The screen generally has a service life of more than one year, and the primary, secondary, and tertiary drums, casing, and door cover have a service life of more than 8 years.
• Lubrication system of this type of centrifuge: The main bearings use hydraulic working pressure oil immersion lubrication, which is reliable lubrication.
♦ Centrifuge overview and application scope
The three-stage piston discharge centrifuge is a continuous operation filtering centrifuge that can automatically complete all operating procedures at full speed, such as feeding, washing, separation, and discharging.
The three-stage piston discharge centrifuge is suitable for separating suspensions of medium and coarse particulate crystalline materials, namely, it is suitable for separating suspensions with a solid content of 35-90%, an average solid particle size ≥0.08mm, and a temperature not exceeding 80℃, and requires a stable and uniform feed concentration. It is especially suitable for material separation requiring washing inside the machine. This machine has the advantages of automatic continuous operation, continuous slag discharge, high production capacity, low filter cake moisture content, low power consumption, less crystal breakage, compact structure, good corrosion resistance, stable operation, and small vibration.
♦ Centrifuge Working Principle
See the structural diagram. After the first, second, and third stages of the drum rotate synchronously at full speed, the suspension to be separated is continuously introduced into the circular cloth feeding plate installed on the second-stage drum through the feed pipe. Under the action of centrifugal force, the suspension is evenly thrown onto the screen installed on the first-stage drum along the circumference. Most of the liquid phase is thrown out of the drum through the screen gaps and the holes in the wall of the first-stage drum, while the solid particles are retained on the screen to form a filter cake layer. When the second-stage drum and the pushing plate move forward, the filter cake layer in the first-stage drum is pushed forward axially by a certain distance through the pushing plate on the pushing plate. At the same time, the filter cake layer in the third-stage drum is pushed forward axially by a certain distance through the pushing plate at the front end of the second-stage drum. When the second-stage drum and the pushing plate return, a new filter cake layer is formed on the empty screen surface of the first-stage drum, and at the same time, the filter cake layer in the second-stage drum is pushed forward axially by a certain distance through the pushing plate at the front end of the first-stage drum. With the continuous reciprocating motion of the second-stage drum and the pushing plate, the solid particles are distributed in the first, second, and third-stage drums in stages, forming a filter cake layer in stages, being pushed forward in stages, and further dewatered in stages. Finally, the filter cake layer is continuously discharged from the third-stage drum into the collecting tank. The scraper installed at the front end of the third-stage drum discharges the filter cake from the tangential direction and discharges it from the discharge port of the casing outside the centrifuge. If the filter cake needs to be washed in the centrifuge, the washing liquid is continuously sprayed onto the filter cake layer through the washing pipe or other washing equipment for washing, and the separated mother liquor and washing liquid are collected in the casing and discharged from the discharge port. If necessary, the mother liquor and washing liquid can be discharged separately.
Three-stage piston push centrifuge structure principle diagram♦ Centrifuge Application Conditions and Adaptability Adjustment
• Basic application conditions of the two-stage piston discharge centrifuge:
► The material to be separated is a suspension or other solid-liquid mixture, not a turbid liquid;
► Suspension concentration ≥35%
► Solid particle size ≥0.08mm;
► Operating temperature during separation ≤80℃
► Appropriate viscosity;
► Separation purpose: solid-liquid separation, obtaining the lowest possible solid water content and liquid solid content.
• Different separated materials have different separation characteristics. Even for the same separated material, different process methods and operating conditions have different separation characteristics. The quality of the separation characteristics of the separated material will directly affect the separation effect and processing capacity of the centrifuge. The separation characteristics of the separated material can be adjusted through the following methods:
► Adjust the suspension concentration through pre-concentration measures;
► Adjust the early-stage process to increase the particle size of the solid;
► Adjust the operating temperature to improve the viscosity of the suspension;
► For some difficult-to-separate materials, in addition to taking corresponding measures for the separated material itself
► Adjustment measures, the centrifuge can also be adjusted and improved accordingly;
► Adjust the drum speed
► Adjust the number of pushing times
► Adjust the screen gap and porosity
• Except for the number of pushing times, which can be adjusted on-site during separation, the adjustments to the technical parameters of the centrifuge must be determined before the centrifuge product is manufactured. In addition, different materials with different corrosion resistance must be matched according to the different corrosiveness of the separated materials. Therefore, when customers inquire, please provide detailed information on the characteristic parameters, operating conditions, and separation requirements of the separated materials.
♦ Centrifuge Quality Assurance
Product quality assurance: Product design, manufacturing, and inspection are carried out in accordance with technical standards such as JB/T447 "Piston Discharge Centrifuge" and quality management system standards such as GB/T19001 idt ISO9001 to ensure that the product quality and performance meet the design drawings, technical standards, and user requirements.
♦ Centrifuge Main Technical Parameters and Materials
Parameter Name/Model
HS580-N HS650-N HS800-N HS1000-N Drum Diameter mm440/510/580510/580/650640/720/800840/920/1000Filtering Area Length mm120/180/120180/240/180180/240/240240/300/240Maximum Drum Speed r/min
1200-19001000-1800800-1500650-1200Depends on the characteristics of the separated materialSeparation Factor402-1010350-1142286-1145236-875Pushing Stroke mm5050 50 50 Number of Pushing Times times/min30-8030-80 30-80 30-80 Working pressure MPa2-33-6 3-6 3-6 Feed concentration %(volume ratio) ≥35≥35≥35≥35Solid particle size mm ≥0.08≥0.08≥0.08≥0.08Production capacity (dry material) t/h 3-8 5-12 12-25 18-35 Sodium chloride (varies with materials and process conditions) Filter residue moisture content % ≤2-4≤2-4≤2-4≤2-4Sodium chloride (varies with materials and process conditions) Feed pressure MPa0.15-0.20.15-0.20.15-0.20.15-0.2Operating temperature≤80℃≤80℃ ≤80℃ ≤80℃ Main motor power30-45
Selected according to the material37-55
Selected according to the material55-75
Selected according to the material75-90
Selected according to the materialOil pump motor power18.5-22
Selected according to the material22-30
Selected according to the material22-37
Selected according to the material37-45
Selected according to the materialCentrifuge mass38004500 7000 12600 Dimensions (length × width × height) mm3400×1330×1628 3250×1460×1280 4050×2000×1530 4300×1900×1900 MaterialThe primary, secondary, and tertiary drums, pusher plates, distribution plates, front seals, housings, door assemblies, screens, and gas-liquid separators, etc., which contact the material, can be made of 304, 316L stainless steel, or 2205, 2507 duplex stainless steel, or TA2 titanium; Main shaft: 45# steel; Push rod: 40Cr; Base: Q235-A.
Previous Page
Product Message
Contact our team promptly; we are happy to help.
*Note: Please be sure to fill in the information accurately and keep the communication open. We will contact you as soon as possible.