Technical Service

What are some clever uses for tubular centrifuges?


summary : Tubular centrifuges are mainly used to separate solid particles and liquids from suspensions, or to separate two immiscible liquids of different densities from an emulsion (e.g., separating cream from milk). They can also be used to remove liquid from wet solids, such as washing clothes in a washing machine. Specialized ultra-high-speed tubular separators can also separate gas mixtures of different densities, such as concentrated separation of gaseous uranium hexafluoride. Some sedimentation separators can also classify solid particles according to density or particle size, because their sedimentation speeds in liquid are different.

  What are the ingenious uses of tubular centrifuges?
  Tubular centrifuges are mainly used to separate solid particles and liquids in suspensions. Or to separate two immiscible liquids of different densities in emulsions (such as separating cream from milk); they can also be used to remove liquid from wet solids, such as washing clothes with a washing machine; special high-speed tube separators can also separate gas mixtures of different densities, such as concentrating and separating gaseous uranium hexafluoride; some sedimentation separators can also classify solid particles according to density or particle size, as their sedimentation rates in liquids are different. Benchtop centrifuges are widely used in chemical, petroleum, food, pharmaceutical, mineral processing, coal, water treatment, and shipping industries.
  Before operation, the tubular centrifuge should first cut off the power supply and loosen the external brake to allow the drum to be rotated by hand to check for any binding. Check other parts for looseness and abnormalities. Turn on the power and start counterclockwise (it usually takes 40-60 seconds from a stop to normal operation). Usually, each equipment must be run empty for about 3 hours after arriving at the factory before it can operate normally. A type of centrifugal separator, equipped with a stack of conical discs, separates emulsions and low-concentration suspended components through centrifugal sedimentation. Disc separators can operate under sealed, high-temperature, low-temperature, pressurized, and vacuum conditions, and are used to extract cream from milk, purify fruit juice, beer, animal and vegetable oils, transformer oil, concentrate yeast, extract serum from animal plasma, etc.
  The suspension enters the drum through the central feed pipe and moves from the outer edge of the disc pack to the inner edge of the disc through the gap between the discs. Due to the action of centrifugal force, the solid particles precipitate on the inner and outer surfaces of each disc while moving with the liquid, then slide to the outer edge of the disc and deposit on the drum wall. The clarified liquid is collected in the center of the drum and discharged through an overflow port or a centrifugal pump.