Technical Service

Plate-and-frame reverse osmosis membrane module for plate centrifuges


summary : Compared to other component forms, the biggest advantage of the flat type is that it is simpler to manufacture and assemble, and the membrane is easier to replace, clean, and maintain.
  Plate-and-frame is a traditional reverse osmosis membrane element. It is derived from plate-and-frame filter presses. The difference lies in that the filter medium of the plate-and-frame filter press is canvas, cotton cake, etc., while the membrane is used here, and the structural design is also different. For example, the structural design of a flat-plate reverse osmosis component requires high pressure resistance. Compared with other component forms, the biggest advantage of the flat-plate type is that it is relatively simple to manufacture and assemble, and the membrane is easy to replace, clean, and maintain.
 
  The basic structure of a flat-plate centrifuge component consists of a membrane, a concentrate flow channel, and a permeate flow channel, which are alternately overlapped and pressed together. This device has a compact structure. The increase in processing capacity can be adjusted by changing the number of membranes; the more membranes, the greater the processing capacity. Due to its simple assembly and relatively robust construction, it offers greater reliability for pressure fluctuations or on-site operations.
 
  The advantages of flat-plate centrifuge components are: the flat-plate component has a larger cross-sectional area of the concentrate flow channel, resulting in lower pressure loss, and the flow rate of the concentrate can reach 1-5 m/s. Therefore, even if the concentrate contains some impurities or foreign objects, it is not easy to block the flow channel, and it has a wider range of adaptability to the objects being processed. Furthermore, the pretreatment requirements are lower. Designing the concentrate flow channel baffle into various shapes of concave-convex corrugations can facilitate turbulent flow of the fluid.
 
  Existing problems are: flat-plate membrane components have high requirements for membrane mechanical strength. Because the membrane area can be as large as 0.4㎡, it is difficult to install and replace without sufficient strength. In addition, the fluctuations caused by liquid turbulence also require the membrane to have sufficient strength to withstand mechanical vibrations. The long sealing boundary line is also one of the main disadvantages of this type. Therefore, the larger the device, the higher the precision requirements for each component. Although the assembly structure is simple, the cost is correspondingly increased.