Technical Service
How to prevent corrosion during centrifuge operation
summary :
How to prevent corrosion during centrifuge operation
How to prevent corrosion during centrifuge operation
In modern industry, preventing corrosion during centrifuge operation has become an increasingly important concern for users. Since most centrifuges operate in chemical raw materials for extended periods, they are highly susceptible to corrosion. Therefore, controlling and mitigating centrifuge corrosion is a crucial issue. Generally, we can mitigate centrifuge corrosion through the following four methods:
1. First, during the selection of a centrifuge, users must choose the right type of centrifuge based on their specific needs. Different raw materials require different types of centrifuges. After determining the model and main parameters, based on the corrosion resistance of different materials in different environments, consider their physical and chemical characteristics, cost-effectiveness, and other factors to fundamentally determine the material of the strength components. From the perspective of the material itself, it must be safe for the target materials.
2. Second, regarding the structural design of the centrifuge equipment, a high-quality design can effectively extend the service life of the centrifuge and improve the safety of equipment use. The simplest design flaws that accelerate corrosion are stress concentration tendencies and crevice environments. Sometimes, even if the metal is immersed in a solution, the corrosion rate is low, but the formation of crevices, due to changes in the chemical and electrochemical conditions of the internal solution, will lead to severe crevice corrosion.
3. Furthermore, the most fundamental approach to effectively controlling corrosion during centrifuge operation is to isolate the corrosive environment. When selecting the model material, methods of surface treatment should be used as much as possible, such as flanges, galvanizing, chrome plating, chemical plating, etc. These methods are effective in many environments, but for rotating parts, it is necessary to note a major phenomenon: the base material and the plating are two different materials, and their linear expansion coefficients are different. This will cause different amounts of deformation during the elastic deformation of the rotating parts, resulting in the formation of many micro-cracks; if the aforementioned phenomenon exists, it will accelerate corrosion formation. Therefore, surface protection methods for rotating parts should be carefully selected.
4. Finally, the use of corrosion inhibitors is important. Centrifuges themselves involve multiple disciplines. To use centrifuges effectively, in addition to the above methods, the operating environment should also be studied. The use of corrosion inhibitors is also widely adopted in practice. For some harsh environments, the use of appropriate corrosion inhibitors can make the parts reach a usable level. As long as technology permits, the selection of corrosion inhibitors should be a useful path for centrifuge use.