Technical Service
What is the entire filtration cycle of a three-legged centrifuge like?
summary :
What is the entire filtration cycle of a three-legged centrifuge like?
What is the entire filtration cycle of a three-legged centrifuge like?
The filtration working principle of a three-legged centrifuge is intermittent filtration. The entire filtration cycle can be divided into the following 5 steps:
1. Filling
The material is fed into the rotating centrifuge drum through a horizontal filling pipe. While filling, the mother liquor is thrown away from the centrifuge drum and forms a filter cake. Multiple fillings can be performed through filling control to achieve the optimal filter cake thickness. The filling process can be carried out at low speed to ensure the initial filter cake formation and reduce leakage.
2. Preliminary drying
Generally, after filling, the mother liquor needs to be quickly thrown away from the centrifuge drum. The centrifuge drum speed is automatically adjusted to the speed set by the operator (higher speed). This is also the preliminary drying step.
3. Washing
When the mother liquor is thrown away from the filter cake, the filter cake usually needs to be washed with one or more washing liquids. The washing liquid is also sent into the centrifuge drum through the filling pipe, dispersed by the support rod, and forms a uniform liquid film on the filter cake. Under the action of centrifugal force, the washing liquid is discharged from the centrifuge drum through the filter cake, achieving the washing effect (the centrifuge speed should be reduced during the washing process to increase the contact time between the washing liquid and the filter cake).
4. Drying
After washing, the centrifuge drum speed is increased to the maximum to dry the filter cake.
5. Discharging
Finally, the centrifuge drum speed is adjusted to the discharging speed, the horizontal moving part of the centrifuge drum is gradually pushed out, and the filter cake is automatically discharged from the centrifuge drum. The centrifuge filter bag is completely turned over while rotating with the centrifuge drum, and the filter cake is completely thrown away from the filter bag. The solid slides into the next process due to its own weight, such as: dryer, cylinder. After discharging, one cycle is completed, the moving part of the centrifuge drum is pushed back into the centrifuge drum, and the original position is restored to start a new cycle.